| Pulser / Receiver |
|
| Probe Connectors |
1, 4, 8 or 16 (expandable up to 128) |
| Software Channels |
up to 256 |
| Transducer Type |
Single or Twin |
| HT Pulse Voltage |
-40V to -300V in 2V increments (Higher voltages optional) |
| HT Pulse Width |
15ns to 1000ns in 5ns increments(with <10ns rise time) |
| PRF |
10Hz TO 20kHz in 10Hz steps (dependent upon voltage, pulse width and gate settings) |
| |
|
| Amplifier |
|
| Gain Range |
-10dB to +110dB in 0.1 dB steps |
| Bandwidth |
0.5 - 40 MHz |
| Input Noise Level |
1.5nV/(Hz) |
| Impedance (Damping) |
133Ω (other options available) |
| Distance Amplitude Correction (DAC) |
| Gain Range |
-10dB to +110dB in 0.1 dB steps |
| DAC Curves |
8 |
| DAC Memory |
16kByte |
| DAC Points per Curve |
Up to 4096, Optimum number is automatically selected depending on channels, frequency & range |
| DAC Frequency |
1/4 to 1/32 of digitisation rate automatically selected depending on range & points |
| DAC Reference |
TX pulse or Interface Echo |
| Signal Filtering & Rectification |
| Low Pass Filters |
1.3MHz, 3MHz, 5.5MHz, 7.6MHz, 10.3MHz, 13.3MHz, 22MHz & Broadband (channel selectable) |
| High Pass Filters |
0.5MHz, 1.5MHz, 3MHz, 4MHz, 6.1MHz, 7.5MHz, 12.5MHz, 16.5MHz (channel selectable) |
| Rectifier |
Digtal - Full-wave, Positive half-wave, Negative half-wave and RF selectable on a channel basis |
| Post-Rectification Filters |
Digital |
| |
|
| Digitiser |
|
| Sampling rate |
125 MHz tp 2,Hz in 7 steps (250MHz optional) |
| Resolution |
8-bit (10/12 bit optional) |
| Points per channel |
65536 (256k optional) |
| Sample Delay |
0 to 10ms dependent upon digitisation frequency |
| Averaging |
2 to 256 frames or disabled |
| Averaging Performance |
Real-time hardware averaging of all channels at maximum digitisation rate |
| Averaging Memory |
128k - dynamically allocated across channels |
| Max. Gates per Channel |
16 - start, length and threshold specified in mm or µs |
| Peak Detection |
Real-time hardware peak detection: First 'n', Last 'n' amplitude |
| Transfer Rate to PC |
133MB/s PCI Burst Mode |
| Encoder Interface |
| Number of Axes |
2 (4 optional) |
| Encoder Type |
Single (Differential optional) |
| Encoder Voltage |
5V (TTL) |
| Encoder Counts |
±231 quadrature counts |
| Input Frequency |
1MHz |
| Video Tracking Interface |
| Maximum Image Size |
768 x 576 (PAL) |
| Detection Speed |
50Hz (PAL) |
| Standard |
PAL or NTSC |
| Motor Drive Unit Interface |
| Description |
External 2 axis DC motor controller and driver (optional) |
| Interface Type |
RS232/485 |
| Link Speed |
115kbps |
